Health and beauty

A clean diamond is more brilliant and fiery than the same diamond when it is dirty. Even a thin film absorbs some light that could have been reflected to the person looking at the diamond. Dirt or grease on the top of a diamond will reduces its lustre,. Following these suggestions as below will help your jewellery look like new again.

Jewellery care    

Don’t expose jewellery to harsh chemicals or perfumes as this could cause damage and discoloration. Don’t wear jewellery when doing anything heavy duty and avoid unnecessary knocks and scratches. Try to avoid spraying your jewellery with beauty products such as hair spray, cosmetics or perfume as this can tarnish or discolour the jewellery. Always put your jewellery on last. Clean your jewellery on a regular basis. Bangles, earrings  and chains should be worn with care in order to avoid surface damage, and should be removed before going to bed. Check for signs of wear and tear regularly, especially on catches and joints. Stone settings can become loose over time, especially if they have been hit against a hard surface or snagged on clothing.

Jewellery cleaning
Some people use ammonia, or laundry detergent, mixed up with warm water in about the same ratio that used for any other cleaning task around the house. But cleaning the jewelleries as above can loosen them or cause them to be lost. So some people would like to go to the jewelry store for their diamond jewelry maintenance and cleaning, but it costs much and also not convenience. A home-used ultrosonic jewellery cleaner will help you solve all these problems. The ultrasonic cleaner uses high frequency waves which vibrate to create many microscopic cleaning bubbles. These bubbles loosen out the dirt in the cracks and crevices of the ring, including prongs. Then a high pressure steamer blasts away the particles.

Refer to
http://www.getbetterlife.com/Wholesale-ultrasonic-cleaner_c802